codex BALKUDROP

Simply laying big tiles.

BalkuDrop is ideally suited for the solid and safe installation of self-supporting tile and natural stone coverings in outdoor areas.
The popular classic among the installation methods - the notch method - in combination with the 2-component BalkuDrop system enables rapid work progress. With a low installation height of only 4 cm, it can be used on almost all surfaces.

YOUR ADVANTAGES

  • Generous cavity structure
  • Secure drainage
  • No lime scale and efflorescence thanks to cement-free binder
  • Low built-up height from 4 mm
  • Rapid work progress due to less working steps

 

TOP PROPERTIES

  • Quickly ready for foot traffic and further work
    (after appr. 2 days)
  • High safety as tensions get absorbed
  • Cementitious-free binding agent 
  • For ceramic- and natural stone from 2 cm thick und 40/40 cm
  • For concrete blocks, at least 4 cm thick

 

PRODUCTS USED

APPLICATION - Step by Step

Please note

  • In case of uneven waterproofing surfaces a drainage mat must be used (Pooling)
  • Regardless of the size of the tiles to be laid, the distance between the notches may not exceed 40 cm.

CODEX PRODUCTS

BST 150 Sealing tape

The self-adhesive sealing tape codex BST 150 is part of the composite waterproofing under ceramic coverings and for corner and transition areas, as well as for codex balcony systems.

DS 3/5 Quartz sand

codex DS 3/5 is a quartz sand mixture with a particle size 3.15 to 5 mm. In combination with codex ER 100 primer, epoxy drainage mortars can be produced.

ER 100 2-C Epoxy Screed and Mortar Resin

codex ER 100 is a two-component epoxy resin for priming and mixing epoxy resin mortars. Codex ER 100 is very easy to use, can be applied early and therefore is time-saving.

X-Fusion 3-C Design Epoxy Mortar

Effortless processing with the award-winning 3-component epoxy grout. codex X-Fusion is suitable for bonding and grouting optically attractive ceramic coverings. Due to the fine and closed joint surface, the joint is very hygienic and easy to clean.

Installation systems for screeds, floors and wood flooring

Machinery and special tools for substrate preparation and installation of floor coverings

Complete product range for installation, renovation and maintenance of wood flooring

Resin and cementitious floor finishes combining performance and design

Installation systems for tiling and natural stone

High quality painting, plastering and drywalling tools